{"id":2655,"date":"2022-10-18T00:23:59","date_gmt":"2022-10-18T03:23:59","guid":{"rendered":"https:\/\/nuevo.impresion3d.website\/?p=2655"},"modified":"2022-10-18T00:23:59","modified_gmt":"2022-10-18T03:23:59","slug":"how-to-add-and-configure-a-3d-filament-in-cura","status":"publish","type":"post","link":"https:\/\/impresion3d.net\/en\/como-agregar-y-configurar-un-filamento-3d-en-cura\/","title":{"rendered":"How to Add and Configure a 3D Filament in Cura"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Cura provides a list of 3D filaments that are already included by default in its settings. <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the filament you use is not on this list <strong>You can filter by brand, color, and filament type, and configure it with the best print settings<\/strong>. <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You can also <strong>Set the cost per meter<\/strong> of the 3D filament.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>To add and configure a new 3D filament in Ultimaker Cura, go to: \u201cPreferences\u201d \u2013 \u201cConfigure Cura\u2026\u201d \u2013 \u201cMaterials\u201d and \u201cCreate\u201d<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This will allow you to add your filament to the curing options, so you can configure the best settings for that filament.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why Add a 3D Filament in Cura<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not all filament brands are the same, nor do they melt at the same temperature. <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Therefore, to achieve the best print quality with your printer, it's best to have a thorough understanding of the filament you're using.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><span style=\"text-decoration: underline;\">For example<\/span>:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>You can make a <a href=\"https:\/\/impresion3d.net\/en\/temperature-tower\/\">temperature tower<\/a> to find out the ideal filament temperature. <\/li>\n\n\n\n<li>You can also <a href=\"https:\/\/www.thingiverse.com\/thing:2080224\" target=\"_blank\" rel=\"noreferrer noopener\">shrinkage tests<\/a>, to see at what distances that filament will start to break into strands.<\/li>\n\n\n\n<li>You can tell if that filament absorbs a lot of <a href=\"https:\/\/impresion3d.net\/en\/moisture-in-3d-printing-filaments\/\">humidity<\/a>, to find a way to keep it dry.<\/li>\n\n\n\n<li>The cost-per-meter ratio as reported by the manufacturer.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Most of <strong>You can save this data in Cura<\/strong>, independently <strong>for each filament<\/strong>, and access them with just a couple of clicks without having to manually change the settings in Cura.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The answer is: <strong>because you can access the settings for each filament with just a couple of clicks.<\/strong><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">How to Add and Configure a 3D Filament in Cura<\/h2>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Open the Cura settings<\/li>\n\n\n\n<li>Click on \"Materials\" and \"Create\"<\/li>\n\n\n\n<li>Configure your filament settings<\/li>\n\n\n\n<li>Configure the filament properties<\/li>\n\n\n\n<li>Configure the Print Settings tab<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\">1) Open the Cura settings<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If the brand of 3D filament you use <strong>is not in Cura<\/strong>, you can add your own by clicking on: <strong>\u201cPreferences\u201d \u2013 \u201cSet Up Cura\u2026\u201d \u2013 \u201cMaterials\u201d and \u201cCreate\u201d<\/strong><\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img decoding=\"async\" width=\"488\" height=\"91\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-menu-preferencias.jpg\" alt=\"\" class=\"wp-image-2857\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-menu-preferencias.jpg 488w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-menu-preferencias-300x56.jpg 300w\" sizes=\"(max-width: 488px) 100vw, 488px\" \/><figcaption class=\"wp-element-caption\">Preferences \u2013 Configure Cura<\/figcaption><\/figure>\n<\/div>\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img fetchpriority=\"high\" decoding=\"async\" width=\"722\" height=\"573\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-preferencias-materiales.jpg\" alt=\"How to Add and Configure a 3D Filament in Cura\" class=\"wp-image-2858\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-preferencias-materiales.jpg 722w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-preferencias-materiales-300x238.jpg 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-preferencias-materiales-624x495.jpg 624w\" sizes=\"(max-width: 722px) 100vw, 722px\" \/><figcaption class=\"wp-element-caption\">Materials, Create: How to Add and Configure a 3D Filament in Cura<\/figcaption><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\">2) Click on \"Materials\" and \"Create\"<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Once the material settings window opens, click \u201c<strong>create<\/strong>\u201d and a \u201c will be generated,\u201c<strong>new generic filament<\/strong>\u201c.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In the example shown in the image, this new filament is named \u201cCustom Material\u201d; you can change this name to reflect your filament\u2019s specifications.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img decoding=\"async\" width=\"771\" height=\"600\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-crear-nuevo-material.jpg\" alt=\"Configuring a 3D Filament in Cura\" class=\"wp-image-2859\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-crear-nuevo-material.jpg 771w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-crear-nuevo-material-300x233.jpg 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-crear-nuevo-material-768x598.jpg 768w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-crear-nuevo-material-624x486.jpg 624w\" sizes=\"(max-width: 771px) 100vw, 771px\" \/><figcaption class=\"wp-element-caption\">Configuring a 3D Filament in Cura: Creating a New Custom Material<\/figcaption><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\">3) Configure your filament settings<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">At this point, you should configure your filament settings in the window on the right.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To continue with this example, I'm going to set up a blue PLA filament as follows:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Show Name<\/strong>: Here I'll specify the filament color (in this case, blue)<\/li>\n\n\n\n<li><strong>Brand<\/strong>: The brand of filament you use regularly (For this example, I'll use Grilon3, which is a brand that doesn't exist in Cura)<\/li>\n\n\n\n<li><strong>Material Type<\/strong>: Here you need to specify the type of filament\u2014whether it's PLA, PETG, NYLON, or any other type. (I'm going to choose PLA.)<\/li>\n\n\n\n<li><strong>Color<\/strong>: Click on the color box, and in the next window, choose a color similar to that of your filament. (In my case, blue.)<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"771\" height=\"600\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento.webp\" alt=\"How to Add and Configure 3D Filament Options\" class=\"wp-image-2860\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento.webp 771w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-300x233.webp 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-768x598.webp 768w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-624x486.webp 624w\" sizes=\"(max-width: 771px) 100vw, 771px\" \/><figcaption class=\"wp-element-caption\">Configuring a 3D Filament in Cura<\/figcaption><\/figure>\n<\/div>\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"771\" height=\"600\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-ejemplo.webp\" alt=\"\" class=\"wp-image-2861\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-ejemplo.webp 771w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-ejemplo-300x233.webp 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-ejemplo-768x598.webp 768w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-ejemplo-624x486.webp 624w\" sizes=\"(max-width: 771px) 100vw, 771px\" \/><figcaption class=\"wp-element-caption\">Setting Up a Blue PLA Filament<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">When you configure the filament information in the right pane, it automatically updates in the left pane.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you add multiple filaments from the same brand, you'll be able to find them all under the same \u201ctab\u201d for the brand you set up.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"771\" height=\"600\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-marca.webp\" alt=\"\" class=\"wp-image-2862\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-marca.webp 771w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-marca-300x233.webp 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-marca-768x598.webp 768w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-nuevo-filamento-marca-624x486.webp 624w\" sizes=\"(max-width: 771px) 100vw, 771px\" \/><figcaption class=\"wp-element-caption\">When the filaments are from the same brand, they will be listed under the same \u201ctab.\u201d<\/figcaption><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\">4) Configure the filament properties<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">After configuring the \u201cbasic information,\u201d you can continue by configuring the \u201cproperties\u201d section below.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>In this section, you can enter the weight of the filament<\/strong>, for example, \u201c1,000 g\u201d if it\u2019s a 1-kilo roll, or \u201c500 g\u201d if it\u2019s a half-kilo roll.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Another option that can be configured<\/strong> (and it's really great) is to find out how much money you're spending on each impression, and it's the option to<strong> \u201ccost of the filament\u201d<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Continuing with the example, it would look like this:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Density<\/strong>: Leave it as is, because it is configured for a filament with a diameter of 1.75 mm (1.24 g\/cm<sup>3<\/sup>)<\/li>\n\n\n\n<li><strong>Diameter<\/strong>: It also stays the same because I'm using 1.75 mm filament<\/li>\n\n\n\n<li><strong>Cost of the filament<\/strong>: This is where you'll enter <strong>the price of the filament<\/strong> you're configuring. (For this example, I'll set it to $9.90)<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"771\" height=\"600\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-propiedades-del-filamento.webp\" alt=\"How to Set the Price of a 3D Filament in Cura\" class=\"wp-image-2863\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-propiedades-del-filamento.webp 771w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-propiedades-del-filamento-300x233.webp 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-propiedades-del-filamento-768x598.webp 768w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-propiedades-del-filamento-624x486.webp 624w\" sizes=\"(max-width: 771px) 100vw, 771px\" \/><figcaption class=\"wp-element-caption\">How to Set the Price of a 3D Filament in Cura<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">Below, you'll see two text boxes where you can enter any information you consider important:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Description<\/strong>: Here you can enter any information you consider relevant about the filament<\/li>\n\n\n\n<li><strong>Information on Adherence<\/strong>: With PLA, you shouldn't have any adhesion issues, but for other filaments, you can use this box to note down any relevant information.<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"771\" height=\"600\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-descripciones-del-filamento.webp\" alt=\"\" class=\"wp-image-2865\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-descripciones-del-filamento.webp 771w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-descripciones-del-filamento-300x233.webp 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-descripciones-del-filamento-768x598.webp 768w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-descripciones-del-filamento-624x486.webp 624w\" sizes=\"(max-width: 771px) 100vw, 771px\" \/><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">Once you've finished configuring the information tab, you'll need to <strong>configure the tab for <\/strong>\u201c<strong>Print Settings<\/strong>\u201c<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At this point, it becomes important to make a <a href=\"https:\/\/impresion3d.net\/en\/temperature-tower\/\">temperature test<\/a>, to find out what the ideal temperature is for your filament, as I mentioned above.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">5) Configure the Print Settings tab<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">In this tab, you'll configure the optimal filament printing temperatures and retraction distances for your filament.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When I created the temperature charts for PLA, I found that the print temperature range provided by the manufacturer was fairly accurate. Even so, I was able to determine that (for that brand), the filament prints best at 215\u00b0 C.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Print Settings:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Default print temperature<\/strong>: Here's where you need to enter <strong>the best temperature<\/strong> for your 3D filament (in my case, thanks to the temperature towers, 215\u00b0 C)<\/li>\n\n\n\n<li><strong>Default plate temperature<\/strong>: 60\u00b0 C<\/li>\n\n\n\n<li><strong>Temperature in standby mode<\/strong>: It can be 180\u00b0 C (I set it to 200\u00b0 C)<\/li>\n\n\n\n<li><strong>Retraction distance<\/strong>: Another very important setting\u2014you need to know these values and configure them here. (5.00 mm)<\/li>\n\n\n\n<li><strong>Retraction Speed<\/strong>: speed at which the filament will retract (45 mm\/s)<\/li>\n\n\n\n<li><strong>Fan speed<\/strong>: 100% for PLA<\/li>\n<\/ul>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"http:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-Ajustes-de-impresion-del-filamento.webp\" alt=\"\" class=\"wp-image-2868\" width=\"771\" height=\"600\" srcset=\"https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-Ajustes-de-impresion-del-filamento.webp 771w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-Ajustes-de-impresion-del-filamento-300x233.webp 300w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-Ajustes-de-impresion-del-filamento-768x598.webp 768w, https:\/\/impresion3d.net\/wp-content\/uploads\/2022\/10\/Agregar-y-configurar-filamentos-en-Cura-configurar-Ajustes-de-impresion-del-filamento-624x486.webp 624w\" sizes=\"(max-width: 771px) 100vw, 771px\" \/><figcaption class=\"wp-element-caption\">Configuring 3D Filament in Cura | Print Settings<\/figcaption><\/figure>\n<\/div>\n\n\n<p class=\"wp-block-paragraph\">At this point, you have finished configuring all the settings for your filament. You can close the window.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Now you can check that the filament you configured appears in the top bar and that the settings are correct.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">When should you add and configure a 3D filament in Cura?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Every time you buy a new filament (one that isn't on Cura's list of default filaments) and you've created the temperature profiles and performed retraction tests for that filament, you can add it to Cura.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That effort won't be in vain, since this data will be saved in Cura, and the next time you buy the same filament, you won't need to add it because it will already be set up.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You'll need to do this for each filament color, regardless of the brand you use.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>Cura provides a list of 3D filaments that are already included by default in its settings. If the filament you're using isn't listed\u2026<\/p>","protected":false},"author":2,"featured_media":2869,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"pmpro_default_level":"","footnotes":""},"categories":[3],"tags":[],"class_list":["post-2655","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-impresion-3d","pmpro-has-access",""],"_links":{"self":[{"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/posts\/2655","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/comments?post=2655"}],"version-history":[{"count":0,"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/posts\/2655\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/media\/2869"}],"wp:attachment":[{"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/media?parent=2655"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/categories?post=2655"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/impresion3d.net\/en\/wp-json\/wp\/v2\/tags?post=2655"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}